- 18 -
•
DETAIL OF THE CHANGE:
30.) MAGNETO
1) FLYWHEEL
The thread hole for the flywheel puller will be eliminated.
After the Change
Before the Change
Note: How to remove the flywheel
from the engine
1) Remove the fixing nut from flywheel.
2) Remove the starter pulley.
3) Temporally assemble the fixing nut to
the crankshaft thread until the end face.
4) Tap the fixing nut with a plastic ham-
mer to remove the flywheel.
a.) Do not tap directly with a
steel hammer.
b) Be careful not to damage the
thread portion when using a steel
hammer.
Tap the fixing nut after inserting
aluminum bar between the fixing
nut and a steel hammer.
