Rev-0 2014.8.21 11:45 A.M.
Operation condition
Select order
Operation
In speed timer mode, press
D
to clear
all values.
Press
C
Display icon
Upwards
Downwards
Choose SEP or ALL
Speed timer mode
Set unit and distance
Press
D
Press
A
Press
D
Press
A
Press
D
Start
Speed timer mode
First lap
Second lap
Third lap
Fourth lap & Stop
Lap time measurement
Split time measurement
NOTE:
Lap is the amount of time from the previous reading while SPLIT is the amount of accumulated
time from the start of the event.
MEMORY RECALL OF STOPWATCH
●
When the record of lap or split is more than 1, press
C
to read the records.
●
Press
C
to check the records in this sequence:
Maximum lap/split>slowest lap/split>average lap/split>split speed>
records upwards or downwards.
Press and hold
C
to speed up checking.
OPERATING THE SPEED TIMER
Please note your SC-889 Speed Timer will not operate if the Stopwath is not reset
to all zeroes. If the word "Speed" does not appear, refer to the Stopwatch Section
for instructions how to Reset to all zeroes.
●
In stopwatch mode, press
D
to clear stopwatch value ,then press
B
, “
”
displays for 2 seconds and enter speed timer mode.
●
Press and hold
C
for 3 seconds to enter speed timer setting mode.
● The maximum distance is 999.999km (mile).
● Maximum speed is 999.999km/h(MPH), when the calculating speed exceeds
this value, “
Error
” displays with beeping, and time continues counting.
●
The speed timer can display up to 999 times of speed, and recorded the last 180
times. For example, if the current display is 250th speed, then 71 to 250 speeds
are recorded.
●
Speed timer accuracy: 0~59minutes 59seconds: 1/100 seconds
60minutes ~23 hour 59minute 59second: 1 second
● The maximum record time of speed timer is 24 hour, and when total record time
reaches 23 hour 59minute 59second, speed timer stops record automatically. In
this case, the values need to clear before start new records.
SELECT MEMORY RECALL DIRECTION FOR SPEED TIMER
SET SPEED TIMER OPTIONS
●
In speed timer mode, press
D
to clear all the values.
●
Press and hold
C
for 3 seconds to enter speed timer setting mode, unit digit (KM
/MILE) flashes. Press
E
to adjust it.
●
Press
B
to step the next item, and press
E
to adjust it.
The setting sequence will be:
KM/MILE> hundreds of distance> tens of distance>units of distance> percentiles
of distance>deciles of distance> quantiles of distance>SEP/ALL
●
Press
C
to confirm and exit setting.
NOTE:
For SEP(separate) and ALL setting, it is OK to choose either of them, as they make no
difference to speed timer function.
USING THE SPEED TIMER
Using this function, you can record the spend of each lap of fixed
distance.
For example, if you measure 4 lap time of the fixed distance, operate as follows:
● In speed timer mode, press
D
to clear the values.
● Press
A
to start counting, with “
RUN
” icon displaying on LCD.
● Press
D
to record the time you spend on each lap when you finish first lap,
second lap and third lap.
● Press
A
to record the fourth lap and stop measurement, with "
STOP
" icon
displaying on LCD.
READ RECORDS OF SPEED TIMER
●
When the record of speed is more than 1, press
C
to read the records.
●
Press
C
to check the records in this sequence:
Maximum speed>slowest speed >average speed > speed records upwards
or downwards.
Press and hold
C
to speed up checking.
ACTIVATING THE BACKLIGHT
In any mode, press and hold
B
for 3 seconds will turn on backlight for 5 seconds.
Use the backlight only as necessary to save on the battery life.
BATTERY REPLACEMENT
If there is no display on the LCD or the display becomes dim, remove the screws at
the back of the unit and replace with a new CR2032 battery at once.
NOTE:
Attention! Please dispose of the used unit or battery in an ecologically safe manner.
