Valves:
PUSH the middle button and turn CLOCKWISE
to OPEN the valve.
PUSH and TURN COUNTERCLOKWISE to CLOSE the valve.
Before inflating, close all valves.
When inflated, close the valve using the cap before you sit in the boat.
If needed, use bayonet adaptors for pumps or blowers to fit the valve properly.
If you detect the air leak around the valve, fasten it using the tool provided you by
producer.
There is press release valve in the floor part. It maintans the accurate pressure in
floor.
Never block the release valve.
This can cause the permanent damage of this part
of the boat. In case of permanent air-leak detected, screw out and clean release valve
by soap and water.
