Powering your Bluetooth Speaker
You can use your Bluetooth speaker with the USB charge cable connected or without
the USB charge cable once the built-in battery has been fully charged.
1. Place the speaker on a
fl
at surface.
2. Insert
the
USB
cable
into the USB socket on a PC, mains adaptor with USB
output of 5V 1A (not supplied) or other USB charging device.
3. Plug
the
micro USB
connector on the cable into the DC in socket on the speaker.
USB charging socket
on PC or other USB
charging device.
About your Bluetooth Speaker
The TravelPad Bluetooth speaker allows you to play audio, play sound from video
fi
les and stream music from Bluetooth capable devices such as your
moblie phone, computer, tablet etc. Its built-in rechargeable battery allows use away from a source of power for up to 12 hours. Your speaker also has a
built-in mircophone so that you may receive a phone call through your speaker whilst your music is paused on your smart phone. The Bluetooth connection
can provide a link for audio up to a distance of approximately ten metres.
3
Battery status indicator
To check the current battery level, press and hold the
Power
On / Off
button to switch on the speaker and the battery status
indicator will show on the front panel in solid green indicating
the current battery level.
Battery is fully charged (more than 70% of battery capacity)
Battery is partially charged (between 30 - 70% of battery capacity)
Battery needs charging (less than 30% of battery capacity)
IMPORTANT:
The battery should not be exposed to excessive
heat such as sunshine,
fi
re or the like. When the product is no
longer required it should be taken to a suitable recycling centre.
4. The
red
battery charge
indicator
will light showing that the internal battery is
charging. Depending on the battery condition charging may take up to 5 hours.
You can charge your speaker whether it is on or off and regardless of the position
of the power lock switch.
5. The
red
battery charge
indicator remains lit while charging is taking place and
will turn off when the speaker is fully charged. Once fully charged the battery will
power your speaker for up to 12 hours depending on the volume level.
6. If you need to use the speaker continually you may keep it connected to the USB
charging device while in use.
7. If not using the speaker for a long time (longer than a few days) we recommend
that the battery is charged and then the unit is switched off. Set the
Power Lock
switch to the lock (Up) position.
The greatest working life from the built-in battery will be obtained
if it is kept topped up by recharging after each use of the speaker,
even if it is only partially discharged. The battery’s working life
will be reduced if the product is left in a discharged condition for
a long period of time.
