13
Manual tuning - FM
1. Fully extend the telescopic aerial.
2. Press
the
On / Standby button
to switch on your sound system.
3. Press
the
DAB/FM button
to select the FM band.
4. Rotate
the
Tuning control
to tune to a station. The frequency will
change in steps of 50kHz.
If the radio is tuned to a station of suffi cient signal strength with RDS
information present, then the display may change to show the station
name. After ten seconds the display will revert to showing the time
and day.
5. When the waveband end is reached the radio will recommence tuning
from the opposite waveband end.
6. Set
the
Volume
to the desired setting.
7. To switch off your sound system press the
On / Standby button
.
If you fi nd that an FM broadcast has a lot of background hiss, this may
often be reduced by setting the radio into Mono reception mode for the
current FM station. Please refer to the section "Stereo / Mono setting - FM"
on page 27 for further details.
2,7
3
4
6
Содержание Sound 80
Страница 1: ...Please read this manual before use ROBERTS DAB FM RDS Sound System Enjoy Listening ...
Страница 34: ...33 Notes ...
