If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to the radio
FM operation
1.
Set the Function switch to the 'Radio' position.
2.
Select 'FM' using the Waveband switch.
3.
Adjust the Volume control until a hissing sound is heard.
4.
The Telescopic aerial which is only operational on FM, should be fully
extended.
5.
Carefully tune to the desired station using the Tuning control.
6.
Angle and rotate the Telescopic aerial to a position giving the best
reception. A knuckle joint at the base of the aerial allows this movement
and an angle of 45 degrees will usually be satisfactory. The FM band
is marked in Megahertz (MHz).
7.
To receive stereo broadcasts set the Mono/Stereo to the 'Stereo'
position the Stereo indicator will light up. If the station being received
is weak some hiss may be audible, to reduce the hiss set the Mono/
Stereo switch to the 'Mono' position to return to mono operation.
8.
Adjust the Deep bass boost switch to the required position.
10. To switch off the radio set the Function switch to the 'Tape Off '
position.
FM Mode
Stereo
Mono
Function
Radio
Tape
O ff
LW MW FM
Waveband
Volume
Tuning
4
Function
Radio
Tape
O ff
FM
88
9 4
96
10 0 104
106
10 8
MHz
88-108 MHz
5 4 0
15 0
6 0 0
18 0
16 0
2 0 0
8 0 0
2 2 0
2 4 0
10 0 0
2 6 0
12 0 0
16 00
KHz
KHz
M W
LW
540 -1600 kHz
150-260 kHz
3 Band Stereo Radio Cassette Recorder
SC 9911
PROVI DED BY
On
Off
