5
2
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press
the
On/Off
button to switch on your radio. The display will show
'Welcome to DAB'
.
3. If this is the
fi
rst time the radio is used a scan of the Band III DAB
channels will be carried out. If the radio has been used before the last
used station will be selected.
4. During the scanning process, the lower line of the display shows a
bar-graph indicating progress of the scan.
5. When the scanning is completed the
fi
rst station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the scan your radio will display
'Service not available'
.
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception. Then, either switch your radio off
and on again, or press the
Auto Tune
button to repeat the scan.
Note:
Radio station name and frequency displays shown in this user guide
may differ from those that you see on your radio. Broadcasters may change
radio station names that are transmitted, and the frequencies used for
DAB and FM radio stations may not be the same in all parts of the country.
AbsR60s
Now tuning...
DAB
Welcome to DAB
AbsR60s
Home of the Beat
DAB
