If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
7
Installing the batteries
4 x 1.5V, LR6 (AA size) type batteries are required.
1.
Open the battery compartment on the back of your receiver by
pressing the marking and opening the lid.
2.
Insert the batteries into the compartment. Make sure the (+) and
(-) ends of the batteries are positioned as shown on the rear of the
receiver.
3.
Close the battery compartment cover.
Note:
When the batteries are low, the battery level icon flashes in the
display. Each time the radio is switched off the battery charge indicator
appears for seven seconds. If the charge level falls below 2 the batteries
must be changed. If the batteries are not replaced within 3 minutes all
stored settings will be lost.
Remove the batteries if the reciever is not going to be used for an
extended period of time. The manufacturer accepts no liability for
damage resulting from used batteries.
Environmental note:
Batteries, including those which contain no
heavy metal, may not be disposed of with household waste. Please
dispose of used batteries in an environmentally sound manner.
1
