Roberts R9942, Руководство по эксплуатации

Страница: 16 / 28

Scan tuning
1. Switch on your radio by pressing the Power button or Remote
button on the earphones for more than 1.5 sec.
2. Press and hold down either the or - buttons until the
frequency in the display begins to change rapidly. Release the
button. Your radio will scan the FM band and stop automatically
when it finds a station of sufficient strength.
3. Adjust the Volume control to the required setting.
4. Press and hold down either the or - buttons for more
than half a second to resume scan tuning.
5. When the waveband end is reached your radio will continue tuning
from the opposite waveband end.
Manual tuning
1. Switch on your radio by pressing the Power button or Remote
button on the earphones for more than 1.5 sec.
2. The required station may be selected by repeatedly pressing either
the or - buttons .
3. Adjust the Volume control to the required setting.
4. When the waveband end is reached your radio will continue tuning
from the opposite waveband end.
15