Operating your radio - DAB
1. Carefully extend the telescopic aerial fully.
2. Press and release the
On / Off
button to switch on your radio. The
display will show
'Welcome to Digital Radio'
for a few seconds and
then the display will show '0:00'.
3. If this is the
fi
rst time the radio is used a scan of the Band III DAB
channels will be carried out. If the radio has been used before the last
used station will be selected. After a short time the current time will
appear on the display.
4. During the scanning process, as new stations are detected the station
counter on the right hand side of the display will increase and stations
will be added to the list. The lower line of the display shows a bar-graph
indicating progress of the autotune.
5. When the scanning is completed the
fi
rst station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the scan your radio will display
'Service Not Available'.
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception. Then either switch your radio off
and on again, or press and release the Auto Tune button to repeat
the scan.
Welcome To
Digital Radio
2
7
Welcome to DAB29
BBC Radio 4
Now Tuning...
