If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Listening to the Radio
1.
Switch on the radio by pressing the
On/Off button
. The
LED dial
pointer
will light up indicating that the radio is switched on.
Note your clock radio will not switch on until the clock has been
set.
2.
Select the required waveband using the
Waveband
selector
switch
.
3.
Tune in to the desired station by rotating the
Tuning control
. The
station frequency is indicated by the
LED dial pointer
.
The
Wire aerial
located on the rear of your clock radio is for FM
reception. The wire should be fully extended and positioned for
optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your clock
radio to the position giving best reception.
4.
Adjust the volume by rotating the
Volume
control
.
5.
The radio can be switched off by pressing the
On/Off
button.
540
150
600
170
200
700
900
230 260 280
1200
1600
kHz
kHz
MW
LW
FM
88
92
96
100
106
104
108
MHz
540
150
600
170
200
700
900
230 260 280
1200
1600
kHz
kHz
MW
LW
FM
88
92
96
100
106
104
108
MHz
On/Off
MW FM
Tuning
Volume
On/Off
8