37
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press and release the
On/Off
button to switch on the radio. Press and
release the
Menu
button. The menu will show on the display.
2. Rotate
the
Tuning
control
until
'SYSTEM'
shows on the display. Press
and release the
Tuning
control.
3. Rotate
the
Tuning
control until
'RESET'
shows on the display. Press
and release the
Tuning
control.
4. Rotate
the
Tuning
control until
'Y'
appears on the display. If you do
not wish to carry out a system reset, highlight
'N'
and then press and
release the
Tuning
control. The display will revert to the previous
display.
5. With
'Y'
displayed, press and release the
Tuning
control. A full reset
will be performed. The station list and presets will be erased. Alarms
will be cancelled and settings will be set to their default values. The
display will show
'WELCOME'
and after a short time the current time
and day will appear on the display.
6. See 'Operating your radio' on page 4 for further details.
In the event of a malfunction due to electrostatic discharge, mains power
supply transients or short interruptions, reset the product as above to
resume normal operation. If you are not able to perform the reset operation
as above, removal and reconnection of the power supply may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
2-5
1
1
