SECTION
2:
SPECIFICA
TIONS
3
BZC Controller Quick Programming Guide
Read each section carefully before following the programming instructions.
®
Roberts-Gordon
1250 William Street, PO Box 44, Buffalo, NY, 14240-0044, USA.
Tel: 716.852.4400
Fax: 716.852.0854
Toll Free: 800.828.7450
©
Roberts-Gordon Canada Inc.
241South Service Road West, Grimsby, Ontario, L3M 1Y7, Canada.
Tel: 905.945.5403
Fax: 905.945.0511
Toll Free: 800.663.9025
Printed in the U.S.A
www.rg-inc.com
Roberts-Gordon
Oxford Street, Bilston, West Midlands WV14 7EG UK
Tel: +(44) 1902 494425
Fax: +(44) 1902 403200
P/N 10001600
1. DAY and NIGHT Temperature Settings
1.1 From the Normal (Run) Mode.
1.2 Press PROG. Enter the Operators Code 0000 - Press ENTER.
1.3 Choose 1 for Data.
1.4 Enter the Zone Number you wish to alter.
1.5 Enter the required DAY temperature (in degrees C or F as
prompted). Enter new temperature using the numeric key-
pad - Press ENTER.
1.6 Enter the required NIGHT temperature (in degrees C or F as
prompted). Enter new temperature using the numeric key
pad - Press ENTER.
1.7 The screen will now display switching times. If you wish to
alter switching times, go to 2.6.
1.8 To accept the settings entered and exit the programming
mode, press RUN to return to the menu.
1.9 Press RUN again to return to the Normal (Run) Mode.
2. Switching Times
2.1
From the Normal (Run) Mode.
2.2 Press PROG. Enter the Operators Code 0000 - Press ENTER.
2.3 Choose 1 for Data.
2.4 Enter the zone number you wish to alter.
2.5 Accept DAY and NIGHT temperatures by pressing ENTER
(refer to 1.5 if you wish to alter the temperatures).
Note: Each zone must be programmed individually for up to four
ON/OFF periods per day. Each period is defined by START
and END times.
24 hour clock must be used throughout.
To set 1 time period only.
2.6 Enter the Start Time for period 1. e.g. 08:00 - Press ENTER.
2.7 Enter the End Time for period 1. e.g. 17:00 - Press ENTER.
2.8 Unused periods must display start: 00.00 end: 00.00.
2.9 Periods 1 to 4 programmed for Monday can be copied to
Tuesday by pressing the PROG key when Tuesday period 1
is displayed. This can be repeated for each subsequent day.
2.10 To accept the settings entered and to return to the Data
Menu at any point, press RUN.
2.11 Press RUN again to return to the Normal (Run) Mode.
3. Override Time
3.1 From the Normal (Run) Mode.
3.2 Press the OVERRIDE key to enter the Override program.
Enter a security code if required.
3.3 Enter the zone you wish to put into an Override.
3.4 Select 1 ON or 2 OFF.
Note: 1) ON - heating in the zone will operate to the required
DAY temperature.
2) OFF- heating in the zone will be in the NIGHT set back
condition.
3.5 Enter the number of hours you wish to override. e.g. :01
The preset maximum number of hours is displayed in brack-
ets.
3.6 Press
ENTER.
3.7 When selection is complete, scrolling to the next screen
(using the scroll key) in run mode will activate the override.
3.8 To end override before the set time is reached, repeat steps
3.1 to 3.5 and set the override Period to :00.
4.Override Temperature
4.1 From the Normal (Run) Mode.
4.2 Pressing the UP and DOWN ARROW KEYS allows you to
increase or decrease the set point for any given zone within
pre-set limits.
5. Current Time and Date
5.1 From the Normal (Run) Mode.
5.2 Press PROG. Enter the Operators Code 0000 - Press ENTER.
5.3 Choose
2
for
Time.
5.4 Select the required date format. Press ENTER to accept this
setting.
5.5 The current time will be displayed. Enter a new time, using
24 hour clock notation.
5.6 Press
ENTER.
5.7 The current Date will be displayed. Enter a new date using
the format selected.
5.8 Press ENTER. The Control will be returned to the Data
Menu.
5.9 Press RUN to return to the Normal (Run) Mode.
6.Daylight Savings Time Adjustment
6.1 From the Normal (Run) Mode.
6.2 When adjustment is required depress the “1” key for a
period of 5 seconds. Adjustment will be made automatically.
7. Holiday Periods
7.1 From the Normal (Run) Mode.
7.2 Press PROG. Enter the Operators Code 0000 - Press ENTER.
7.3 Choose 4 for Holidays.
The control can be programmed for 5 holiday periods.
7.4
Enter a start date. Enter a date using the date format
selected (e.g. dd/mm/yy or mm/dd/yy) - Press ENTER.
7.5 Enter the length in number of days. e.g. 05. - Press ENTER.
7.6 Repeat this for each holiday period to be set.
7.7 The Control will be returned to the Data Menu.
7.8 Press RUN to return to the Normal (Run) Mode.
Note: During the holiday period all the zones will operate at
NIGHT set back temperature.
8. Further Information
Further Programming and set up instructions can be found in the
Operation and installation manuals listed below:
8.1 North America 120V
ROBERTS GORDON
®
BZC Controllers:
Part Number
Manual
10011601NA
100 Installation and Service manual
10031600NA
300/100 Operation manual
10031601NA
300 Installation and Service manual
10071600NA
700 Operation manual
10071601NA
700 Installation and Service manual
8.2 Europe 230V
ROBERTS GORDON
®
BZC Controllers:
Part Number
Manual
10011600UK
100 Operation manual
10011601UK
100 Installation and Service manual
10031600UK
300 Operation manual
10031601UK
300 Installation and Service manual
10071600UK
700 Operation manual
10071601UK
700 Installation and Service manual
FIGURE 2 -
ROBER
TS GORDON
®
BZC Controller Quick Programming Guide