5
WARNING
• SECURE WORK.
Use clamps or a vice to hold work when practical. It’s safer than using
your hand and it frees both hands to operate tool
• DON’T OVERREACH.
Keep proper footing and balance at all times
• MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing accessories
• DISCONNECT TOOLS
before servicing: when changing accessories and belts
• REDUCE THE RISK OF UNINTENTIONAL STARTING.
Make sure switch is in off
position before plugging in
• USE RECOMMENDED ACCESSORIES.
Consult the owner’s manual for recommended
accessories. The use of improper accessories may cause risk of injury to persons
• NEVER STAND ON TOOL.
Serious injury could occur if tipped
or
if the cutting tool is
unintentionally contacted
• CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and
perform its intended function - check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect its
operation. A guard or other art that is damaged should be properly repaired or replaced
• DIRECTION OF FEED.
Feed work into a blade or cutter against the direction of rotation
of the blade or cutter only
• NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.
Don’t leave tool
until it comes to a complete stop
