EN
Daisy chain:
EN - 6 -
Power supply
Voltage
Frequency
Input power
Connectors
100
T
264 V
50-60 Hz
0,7 A / 130 W @ 230V
1,15 A / 135 W @ 120V
1,40 A / 135 W @ 100V
Max: 1,5A
Standby mode: 10W
Neutrik powerCON TRUE1 TOP
Input :
ref. NAC3FPX-TOP
3.2 Electrical information
3.2.1 LED source
Never touch or scratch the LED surface.
See 6.1.4
LED cleaning procedure if cleaning is necessary.
3.2.2 Power supply
3.1.5 Safety cable
• Class 1 product. This luminaire must be earthed.
• Must be connected directly to AC power. Do not connect to dimmer power.
• Automatic mains voltage detection.
Power
Maximum :
22 units @ 230V
11 units @ 120V
• When hung or flown the fixture must be secured by an additional hanging accessory (such as a
safety bond or cable) of suitable length.
• The combined weight of both the fixture and the accessories must be considered when choosing
the load-bearing capability of safety cable or bond.
• Safety cables or bonds must be securely attached to the back of the fixture and be as short as
possible, or rolled up as necessary, to minimise travel distance should the fixture be dislodged.
