EN
EN - 17 -
5 Controls and parameters
5.1 Web interface
5.1.1 Control
5.1.2 Default IP address
5.1.3 Network IP of the computer
5.1.4 Connect to web interface
1 - Open a web browser (Microsoft Edge, Firefox, Apple Safari...)
2 - Enter the URL address of the Sully fixture: http://2.XXX.XXX.XXX
3 - All parameters can be now modified
Ethernet
connection
The fixture must be connected to a compatible network or directly to a computer using an ethernet cable.
T
If address unknown (due to previous modification) you can retrieve the current IP address with an
RDM Controller or RDM Test Tool. As a last resort a hard reset can be done (
see 6.5
Factory defaults
).
By defaut :
DHCP = OFF
Address = 2.XXX.XXX.XXX
Mask = 255.0.0.0
The computer must be on the same network as the Sully fixture.
Please refer to your computer Operating System to change IPV4 parameters :
• Microsoft Windows:
https://support.microsoft.com/en-us/windows/change-tcp-ip-settings-bd0a07af-15f5-cd6a-363f-ca2b6f391ace
• MAC OS:
https://support.apple.com/en-gb/guide/mac-help/mchlp2718/10.15/mac/10.15
1 - ADDRESS = 2.XXX.XXX.YYY with YYY ≠ XXX
Do not use the same IP address as the Sully fixture
2 - MASK = 255.0.0.0
