EN
EN - 8 -
DATA connectors
PIN #
DMX
Description
1
Shielding
Foil & Braided Shield
2
DMX (-)
1
st
conductor of 1
st
twisted pair
3
DMX (+)
2
nd
conductor of 1
st
twisted pair
4
Not used
1
st
conductor of 2
nd
twisted pair
5
Not used
2
nd
conductor of 2
nd
twisted pair
DMX OUT
DMX IN
3.2.3 Data
DATA
Protocol
Input connector
Output connector
USITT DMX 512-A
XLR 5-pin
XLR 5-pin
Wireless DMX option
• Protocol: Wireless Solution W-DMX™
• Refer to the OEM User’s manual for general recommendations and
use of the transmitter:
http://www.wirelessdmx.com
• The antenna must be clearly visible from the transmitter
•
Refer to RJ-LED Software manual for activation procedure
(page EN-15)
• Do not connect a DMX IN data cable in case of wireless DMX use
Integrated terminal plug:
If no XLR connector is detected on DMX OUT connector, a 120Ω terminal plug is
automatically activated. Additional terminal plug on the last unit is not necessary.
The first unit receives the DMX signal via the wireless network, then all the
other units are connected on the first one via DMX data cable.
DMX mode:
Maximum :
32 units
OUT
OUT
IN
IN
IN
etc.
