4
© 2022 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Part no. 209-1440 04/13/2022
Craft Series Mirror
PREP THE WALL
4X
*Actual wall anchor many differ from type shown.
1. Locate the studs and drill four holes using a 3/32" drill bit.
2. If no stud is available, drill a 1/4" hole for each wall anchor and use the supplied wall anchors*.
3. Use four screws provided to attach cleats to the wall.
4. Tighten screws until tight. When anchors are used, keep turning screw at least 4 more times as shown.
1
1. Hang the mirror on the cleats and check level, adjust horizontally to desired location (This may require two people).
MIRROR INSTALLATION
Cleat
Mirror
Wall