Robe WeatherShield 575W Series, Руководство пользователя

Страница: 4 / 6

4 5
2. Installation
1.Place the fixture upright down on two tables (2) (flight cases or similar supports).
2.Put the WeatherShield (3) on the base (1) of the fixture.
3.Fasten clamps (5) with M12 bolt and lock nut to the two omega holders (6) through the holes in the omega
holders.
4.Lift off the rubber protecting covers (8) and fasten the omega holders (9) into the base of the fixture using
their quarter-turn fasteners (7) and turn them fully clokwise.Check if the quarter-turn fasteners are locked.Close
the rubber covers back.
5.Cut through marked guideline (11) in the two rubber protecting covers in order to create a slot for safety cable.
Lift off the rubber covers and thread the safety cable (12) through both covers and through the two apertures
(4) in the base of the fixture.Close the rubber covers back.
1
2
4
3
5
6
7
8
8
9
10
12
11
Detail
lift out
lift out