Robe ROBIN SPIKIE, Руководство пользователя

Страница: 18 / 36

8
Tilt C a tilt continual movement
P/T Sp a pan/tilt speed
Powr power/special functions
Virt C a virtual colour wheel
Red a red colour coarse
Red F a red colour fine
Green a green colour coarse
Green F a green colour fine
Blue a blue colour coarse
Blue F a blue colour fine
White a white colour
White F a white colour fine
CTC a colour temperature correction
C Mix C a colour mix control
Prism a rotating prism
Flow E a flower effect
Flow ER a flower effect rotation
Zoom a zoom function
Zoom F a zoom function fine
Stro a strobe/shutter function
Dimm a dimmer function coarse
Dim F a dimmer function fine
F.Tim a fade time (0-25.5 sec)
S.Tim a step time (0-25.5 sec)
COPY copying the current prog. step to
the next prog. step
4. Press [ENTER] button to confirm adjusted value .
5. Press [ESCAPE] button, select next prog. step, press [ENTER] button and repeat steps 3 - 5).
6.7 Reset
This option enables the Robin Spikie to index all effects and return to their standard positions.
6.8 Special functions (Special)
RDM Low - This menu item shows the first part of the RDM identification code .
RDM High - This menu item shows the second part of the RDM identification code.
Wireless - Stat - Use the menu to read wireless DMX status.
Unlink - use this item to unlink fixture from wireless DMX.
Adjust
-
Adjustment
. The menu allows the fine adjustment of effects.
DMX Val
-
DMX values
. Use the menu to set DMX values of fixture´s channels.
Calib
- calibration fixture effects.
Cal Mech
- Use this menu to calibrate mechanical effects:
Pan C - position of the pan
Tilt C - position of tilt
Pr1 C - position of prism
Pr2 C - prism rotation
Fl1 C - flower effect frost movement
Fl2 C - flower effect rotation fine
Zoom - Zoom position fine
Cal Col - Use this menu to calibrate white colour 5600K.
Calibration of the pan/tilt via the control board
1. Disconnect DMX controller from the fixture and enter the "Cal P/T" menu.
2. Use the [PREV] and [NEXT] to find "Pan" and press [ENTER].
3. Set desired value and save it by pressing [ENTER].