Robe pixelPATT, Руководство пользователя

Страница: 5 / 7

5
3. Installation
The PixelPatt must be installed by a qualified electrician in accordance with all
national and local electrical and construction codes and regulations.
3.1 Mounting the pixelPATT
The fixture can be rigged to the truss or fastened to the floor stand via a mounting yoke. The hole of diameter
of 13 mm in the yoke serves for fastening a clamp (or a spigot) to the yoke.
Note: the spigot has to be inserted into the floor stand and always secured.
3.2 Connecting the pixelPATT with the PATT Driver
1. Disconnect the PATT Driver from mains.
2. Connect the pixelPATT to the PATT Driver by means of the 4-pin data cable.
3. Connect the PATT Driver to mains and make desired setting.
ALWAYS DISCONNECT THE PATT DRIVER FROM MAINS BEFORE CONNECTING/DISCONNECTING
THE PIXELPATT.