background image

1.Introduction

Thank you for choosing an ROBE Fog 850 FT.  You now own a rugged and powerful state-of-the-art machine.  Prior to use, we suggest 
that you carefully read all of the instructions.  By following the suggestions found in this user manual, you can look forward to the reliable 
and satisfactory performance of your ROBE Fog 850 FT machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and safe life for your fog machine.

2.Cautions

Risk of electric shock.  Disconnect the appliance from the electric supply before 

reffiling liquid,cleaning or perfoming maintenance on the  machine. 

 
Note: there are no user serviceable parts inside.

 

Danger of Electric Shock

 

Keep this device dry.

 

For inside use only.  Not designed for outside use. 

 

 

Use -prong grounded electrical outlet only.  Prior to use take care to determine that the unit is installed at the rated

 

voltage.

 

Always unplug your ROBE Fog Machine before filling its tank.

 

Keep fog machine upright.

 

Unplug the machine when not in use.

 

This machine is not water - or splash-proof.  If moisture, water, or fog liquid gets inside the housing, immediately unplug  

 

the unit and contact a service technician or your ROBE distributor before using it again.

 

No user serviceable parts inside.  Refer to your ROBE distributor or other qualified service personnel.

 

Danger of Burns

 

For adult use only.  Never leave the unit running unattended.  

 

Never aim the output nozzle directly at people.

 

Fog machine output area is very hot.  Avoid coming within 60 cm of the output nozzle during operation.

 

Locate the fog machine in a well-ventilated area.  Never cover the unit's vents.  In order to guarantee adequate ventilation,  

 

allow a free air space of at least 0 cm around the sides and top of the unit.

 

Never aim the output nozzle at open flames.

 

If the supply cord is damaged, it must be replaced by manufacturer or its service agent or similarly qualified personnel in  

 

order to avoid a hazard.

 

The output nozzle becomes very hot during operation (200 degrees C).  Keep flammable materials at least 50 cm away  

 

from the nozzle.

 

Always allow your Fog 850 FT to cool down before attempting to clean or service it.

  

Danger of Explosion

 

Never add flammable liquids of any kind (oil, gas, perfume) to the fog liquid.

 

Use only original liquid recommended by ROBE distributor. Other fog liquids may cause clogging or "spitting".

 

Always make sure there is sufficient liquid in the fog liquid tank.  Operating this unit without liquid will cause damage to the  

 

pump as well as over-heating of the heater.

 

If your ROBE Fog Machine fails to work properly, discontinue use immediately.  Drain all fog liquid from the tank, pack the  

 

unit securely (preferably in the original packing material), and return it to your ROBE distributor for service.

 

Always drain tank before mailing or transporting this unit.

 

Never drink fog liquid.  If it is ingested, call a doctor immediately. If fog liquid comes in contact with skin or eyes, rinse 

 

thoroughly with water.

Pay attention to all warning labels and instructions printed on the exterior of your 

Fog 850 FT

Содержание Fog 850 FT






Отзывы: