Robe Divine 160 RGBW, Руководство пользователя

Страница: 17 / 23

Divine 160 RGBW
17
5.4 Manual mode
Use this menu to control all channels via buttons of the control board.
Items in this menu depend on selected DMX mode.
To control fixture channels.
1. Use the UP/DOWN buttons to find “ Man.C“ menu.
2. Press the ENTER button.
3. Use the UP/DOWN buttons to select desired effect (channel).
List of control channels:
“Func” – a channel Special Functions
“rEd.1” – a red LEDs saturation coarse- zone 1
“GrE.1” – a green LEDs saturation coarse- zone 1
“bLU.1” – a blue LEDs saturation coarse- zone 1
“VhI.1” – a white LEDs saturation coarse- zone 1
“rEd.2” – a red LEDs saturation coarse- zone 2
“GrE.2” – a green LEDs saturation coarse- zone 2
“bLU.2” – a blue LEDs saturation coarse- zone 2
“VhI.2” – a white LEDs saturation coarse- zone 2
“rEd.3” – a red LEDs saturation coarse- zone 3
“GrE.3” – a green LEDs saturation coarse- zone 3
“bLU.3” – a blue LEDs saturation coarse- zone 3
“VhI.3” – a white LEDs saturation coarse- zone 3
“rEd.4” – a red LEDs saturation coarse- zone 4
“GrE.4” – a green LEDs saturation coarse- zone 4
“bLU.4” – a blue LEDs saturation coarse- zone 4
“VhI.4” – a white LEDs saturation coarse- zone 4
“Cto” – a colour temperature correction
“Vir.C.” – a virtual colour wheel
“Stro.“ - a strobe/shutter
“dinr“ - a coarse dimmer
“din.F” a fine dimmer
4. Press the ENTER button and use the UP/DOWN buttons to set value , press the ENTER button to confirm it.
5. 5 Test sequences
Use this menu to run demo-test sequences without an external controller, which will show you some possibilities
of using the Divine 160 RGBW.
5.6 Stand-alone setting
The fixtures on a data link are not connected to the controller but can execute pre-set programs which can be
different for every fixture. “Stand-alone operation” can be applied to the single fixture or to multiple fixtures
operating synchronously.