Robe CityLine 48, Руководство пользователя

Страница: 15 / 26

CityLine 48
15
6. Fixture menu
The control panel menu allows to set the fixture according to your needs, obtain information on its operation, test
its various parts and lastly program it, if it has to be used in a Stand-alone mode.
The four control buttons on the front have the following functions:
- ESCAPE button-leaves menu without saving changes.
- ENTER
button- enters menu, confirms adjusted values and leaves menu.
- UP and - DOWN buttons - move between menu items on the same level, sets values.
After switching the fixture on, the fixture display shows the current DMX address:
Use the UP/DOWN buttons to scroll through the various menu items. To select desired item, press the ENTER.
6.1 Fixture Address
Use this menu to set the DMX address of the fixture or set the fixture as a Master (Slave).
dM.Ad. --- DMX addressing . Select this submenu to set a DMX start address.
To set a DMX address.
1. Use the UP/DOWN buttons to find “
A001
“ menu.
2. Press the ENTER button.
3. Use the UP/DOWN buttons to select desired start address.
4. Press the ENTER button to confirm the choice.
Note : After switching on, the CityLine 48 will automatically detect whether DMX 512 data is received or not.
If there is no data received at the DMX input, the display will start to flash with actually set address.
6.2 Fixture information
Use this menu to read useful information about the fixture status.
To display desired information.
1. Use the UP/DOWN buttons to find the “ InFo“ menu.
2. Press the ENTER button.
3. Use the UP/DOWN buttons to select the required menu item.
4. Press the ENTER button to confirm the choice.
Po.ti. --- Power On Time. Use the menu item to read the number of operation hours for each LEDs operating
mode.
totL - the function shows the total number of the operation hours in the “FuLL” mode since the
CityLine 48 has been fabricated.
rESEt
- the function shows the number of the operation hours that the CityLine 48
has been powered on in the “FuLL” mode since the counter was last reset. In order to reset this
counter to 0 you have to press and hold the UP and DOWN buttons and at the same time press
the ENTER button.
DM.In. --- DMX values . Select this function to read DMX values of each channel received by the fixture.
VErS. --- Software Versions. Select this function to read the software version of the fixture processor.