3
To install the termination box
1
. Separate cores in length cca 40mm on the end of the 5-wire flat cable (1).
2
. Insert the 5-wire flat cable (1) through the bushing (2) into the base of the termination box (3) until it touches
the partition (4) in the termination box (3) and align the cores into cutting edges.
3
. Put the cover (5) to the base (3) and press both parts (3) and (5) together until both plastic catches (6) snap
into slots (7) in the base of the termination box (3). For pressing use suitable pliers with flat jaws.
4
. The hole (8) in the housing of the the termination box serves for screwing to the mounting surface.
3. Technical specifications
LED device:
1W RGB multi-chip
Max. current :
17 mA (3 channels together)
Maximum power consumption:
0.8 W/48V
Power supply:
24-50 V DC ;suitable for damp locations
24-30 V DC max. ;suitable for wet locations
Compatible power supplies:
ArcPixel Power-US,
ArcPower Unit Pixel Rack Mount US,
ArcPower Unit Pixel Wall Mount US,
ArcPower Unit Pixel
Rack Mount US LV, ArcPower Unit Pixel Wall Mount US LV,
DRS
Typical Lumen maintenance:
50000+ hours L50@ 50°C
Cooling system:
convection
Beam angle:
126°x 133°(at half beam)
Ambient operating temp.range:
-20°C/+50°C
Control electronics:
Internal chip protection against overheating
Design:
Base:
plastic
ABS
Dome: frosted polycarbonate
Weight:
0.2 kg
Mounting:
via 2 holes in base
IK rating:
IK09
Data cable:
5 wire flat cable Coast Wire & Plastic tech.
Содержание ArcPix-US
Страница 7: ...7 ...