Eminere Wireless DMX
6
The output panel connector at last fixture in the Emineres chain has to always be covered with the water-tight
cap to keep declared IP rating.
Do not connect (disconnect) Emineres to the Booster box and each other when they are under voltage!
Direct visibility between a transmitter and the Eminere Wireless DMX must be ensured without
no obstacles (bildings, trees,....).
Distance between a DMX transmitter and the Eminere Wireless DMX depends on transmission range of used DMX
transmitter, surrounds etc (we recommend to test behaviour of DMX transmitter with the Eminere Wireless DMX
before installation).
Examples of connection
The Eminere can be only linked to a transmitter by running the link procedure at DMX transmitter .
The Eminere can be unlinked from the transmitter by running the unlink procedure at DMX transmitter or by
switching off/on the Eminere three times while the transmitter is switched off.
During off/on unlink procedure, the Eminere has to be switched on for 5 seconds in steps 1-3:
Step 1: Eminere Off, Eminere On (5seconds)
Step 2: Eminere Off, Eminere On (5seconds)
Step 3: Eminere Off, Eminere On (5seconds)
Step 4: Eminere Off, Eminere On
Successful unlink is signalized by flashing LEDs at fourth switching the Eminere Off and On. If the LEDs flashing will
not appear, probably the 5 seconds period has not been kept and you have to repeat the Off/On procedure to
unlink the fixture from the DMX transmitter .
DMX addressing of connected Emineres has to be done manually by means of the Robe Universal Interface WTX
and the software RDM Manager.
The tables below state max. theoretical number of Emineres connected in series without Booster boxes.
EMINERE 2 wireless DMX
Voltage
Cable length *
120V
190V
230V
277V
10 m
32
32
32
32
20 m
32
32
32
32
30 m
28
32
32
32
Содержание ANOLIS
Страница 1: ...Version 1 8 ...