Robe Anolis Calumma S MC, Руководство пользователя

Страница: 6 / 18

Calumma S
6
1.Unscrew the four screws (1) from the cover (2) on the junction box to get access to the terminal block (3) and
two mounting holes of diameter of 4.6 mm (4).
2. Screw the junction box on a non-flammable flat surface.
3. Connect cables.
The cable gland M20 x 1.5 with a standard seal serves for a cable of diameter of 7-13mm, for smaller diameter of
cable (4-8mm) you have to remove the original seal from the cable gland M20x1.5 and use the enclosed reducing
seal instead of it. The reducing seal for diameter of cable 4-8mm (P/N 13051388) is enclosed in the Junction box.
Remove the end cap from the cable gland before passing the cable.
We recommend to apply an adequate layer of the paste LOCTITE 5331 on the plastic holder of the cable gland
before inserting it into the body of the gland and an adequate layer of the paste LOCTITE 577 on the thread of the
gland body.
Cable gland M20x1.5:
4. Screw the cover (2) back on the junction box.