Operating Manual
RO-Control NAVY Serie
s
No.8721
No.8722
No.8723
No.8724
Page
3
•
W
ith a copper cooling head for good heat dissipation with a water cooling system and
MOSFETs with extremely low internal resistance, this greatly improves overcurrent resistance.
•
Innovative software especially for the use of RC boats, with excellent starting and acceleration
behaviour, in connection with an excellent suitability for applications where rapid load changes
occur.
•
Two different modes can be set: forward, forward and reverse for different applications
•
Several built-in safety precautions: Undervoltage cut-off, overheating protection, protection
against loss of input signal, specially designed for use in
RC-boats
•
Eight different timing levels programmable, thus compatible with most brushless motors
•
Convenient configuration via optional programming card possible
Connect the ESC, motor, receiver, drive battery and servos as shown in the following two pictures.
The three lines from the controller to the motor have no polarity and can be connected freely.
Please check all connections and make sure the motor rotates correctly before proceeding to step
2. If the motor has the wrong direction of rotation, it is necessary to exchange any two connections
between controller and motor.
02. Commissioning a new controller
Connections
yellow
blue
receiver
controller
switch
Picture 1
battery
Picture 2
yellow
blue
receiver
controller
switch
battery 1
battery 2
Содержание RO-Control NAVY 120 A
Страница 1: ...ro navy Operating Manual...
