manualshive.com logo in svg

ROBBE blue arrow 1.0 3D, Руководство по эксплуатации

Поделиться
Скачать
ROBBE blue arrow 1.0 3D Скачать руководство пользователя страница 6

Dear Customer,

Congratulations on choosing a factory-assem-

bled model helicopter from our range. Many 

thanks for placing your trust in us. 

The model can be completed and made ready to 

fly very quickly. Please read right through these 

instructions before attempting to fly the model for 

the first time, as this will make it much easier to 

operate the model safely.

All directions, such as “right-hand”, are as seen 

from the tail of the model, looking forward.

Specification:

Main rotor Ø: 

approx. 246 mm

Tail rotor Ø: 

approx. 37 mm

Overall length:  

approx. 240 mm

Weight:  

approx. 45 g

Main rotor motor: 

N30

Tail rotor motor: 

6.0 mm

Power supply:  

LiPo battery, 3.7 V / 200 mAh

Recommended accessories:

8 x 8005 NiMH AA-cell, 1.2 V / 2500 mAh

1 x F1415 Transmitter charge lead

1 x 8564 POWER PEAK

®

 Uni 7 EQ 230V  

Set contents:

1 x BLUE ARROW 1.0 3D

1 x 2.4 GHz transmitter

1 x Lithium-Ion-Polymer battery

1 x Replacement tail rotor blade

1 x Charger and mains PSU for the flight battery

1 x Adapter lead

1 x Screwdriver

Please be sure to observe the Safety Notes concerning 

the handling of Lithium-Ion-Polymer batteries (page 11). 

6

Operating Instructions, BLUE ARROW 1.0 3D RTF 2.4 GHz No. S2523

Содержание blue arrow 1.0 3D





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды