Page: 10
Stage 2
4) Press
‘
Power Level’
again until desired power is displayed for Stage 2
5) Enter cooking time for Stage 2 using the numerical keypad
6) Repeat Steps 4) and 5) if Stage 3 is required
7) Press
‘Start’
to begin cooking or
‘Stop’
to cancel programming. Display will
show total time and run through the stages automatically.
8) Cooking can be paused by pressing
‘Stop’
once. Pressing
‘Stop’
while
paused will clear remaining time. To resume cooking while paused, press
‘Start’
REPEAT
If
‘Start’
is pressed shortly after a cooking cycle is finshed the microwave will
repeat the previous cooking cycle. Note
‘Start’
must be pressed before the
microwave enters idle mode.
Note: This feature is disabled in factory default settings and can be enabled in
Advanced User Settings, see section below for setup procedure.
DEFROST
Defrost function cycles power intermittently to assist food to thaw evenly.
1) Press
‘Defrost’
button
2)
Enter desired time using numeral keypad
(Max defrost time is 60 minutes)
3) Press
‘Start’
to begin defrost
The DEFROST indicator lights on the display show the oven is in the
DEFROST mode. The oven beeps during the defrosting cycle to signal that the
food needs to be turned or rearranged. When the defrosting time ends, you will
hear 3 beeps.
