3
The appliance should be disconnected from all
power and allowed to cool before cleaning or
servicing.
Regularly inspect the electrical supply cord and
plug and discontinue use immediately if
damage is found. Return to manufacturer or
authorised repairer for repair prior to use.
This appliance contains no user-serviceable
parts. Roband Australia, one of our agents, or a
similarly qualified person(s) should carry out
repairs.
Keep cord away from heated surfaces.
This appliance is intended as a food display
warmer only. It should not be used to cook
food.
Do not remove any cover panels from the
appliance.
Roband will accept no liability if:
Non-authorised personnel have tampered
with the appliance
The instructions in this manual have not
been followed
Non-original spare parts are used
There is any damage to the unit
SAFETY GLASS
The Toughened Safety Glass used in the
ROBAND
®
Pie Warmers is approximately five
times stronger than normal glass.
Despite the high impact strength, the
toughened glass is still susceptible to breakage
if impact or pressure is applied to the edge or
corner of the glass.
CAUTION: Ensure glass edges are protected
during installation and operation.
CLEANING & MAINTENANCE
CAUTION: Disconnect from power and allow to
cool before cleaning.
CAUTION: Steel cutting processes used in the
construction of this appliance can result in sharp
edges. Avoid contact with sharp edges during
cleaning and maintenance.
CAUTION: Handle glass with care when
cleaning.
Do not clean with the use of a water jet or
immerse in water.
Do not use caustic or abrasive cleaning products
as they will damage the appliance.
Wipe all surfaces of the appliance with warm
soapy water using a damp non-abrasive cloth.
Wipe glass on a daily basis with a cloth and
warm soapy water or glass cleaner.
Empty crumb tray on a daily basis and wipe with
a damp cloth with warm soapy water.
Regular cleaning will prevent a build-up of oils
and keep the appliance looking new.
INSTALLATION
Remove all packaging materials, tape, and any
protective plastic from the appliance. Remove
any glue residue from the protective plastic or
tape using citrus cleaner.
Place the product on a firm, level surface in the
desired position. Install at least 100mm from
combustible materials and a least 50mm from
any other appliance.
Do not connect to power using an extension
cord.
Before connecting the appliance to the power
supply, ensure that all switches are in the OFF
position. Connect only to a RCD protected,
grounded 3-pin outlet.