ROBAND Haellde RG-250 diwash, Инструкция пользователя

Страница: 5 / 8

CLEANING IN A DISHWASHER: All removable
parts of the RG-250 diwash are dishwasher
safe. Never use a dishwasher that has granules
or uses similar forms of treatment.
washing detergents with low chlorine content.
Never use sharp or abrasive objects such as
knives or aggressive scouring materials.
CLEANING MATERIALS: Use the brush
supplied with the machine or a similar one to
centre of the machine can be cleaned with a
small bottlebrush. Use a damp cloth to wipe
down the other surfaces on the machine.
WARNING:
the machine.
• Do not use boiling or hot water.
intended for the purpose of cleaning.
• Do not use abrasive detergents or cleaning
products.
• Do not use disinfectants or tap water with
extra high chlorine content (more than 50
ppm).
AVOID: Do not use cleaning sponges with
scouring pads (e.g. Scotch-Brite™) unless
surface and makes it less water repellent.
ADVICE ON CARE:
to avoid oxidation and discoloration of the
surface.
INFORMATION: If the machine is left damp
for longer periods stains will appear. These
stains are harmless but the original surface
will lose its lustre. Vegetables and fruit contain
acids. Depending on which products are
TROUBLE SHOOTING
To eliminate the risk of damage to the motor,
the machine if the temperature of the motor
should become too high. The thermal motor
protection has automatic reset, which means
that the machine can be started again when the
between 10 and 30 minutes.
FAULT: The machine cannot be started,
or stops while it is running and cannot be
restarted.
isolating switch is closed. Check that the feed
in the correct position. Move down the pusher
fuses in the fuse box for the premises have
machine. If the machine still fails to run, call in
correct cutting tool or combination of cuttings
tools. Fit the decoring device. Check that the
knives and grater/shredder plates are in good
condition and are sharp. Press the food down
FAULT: The cutting tool cannot be removed.
thick leather glove or other glove that the knives
of the cutting tool cannot cut through, and turn
the cutting tool clockwise to release it.
FAULT: The decoring device cannot be
removed.
REMEDY: Use the wrench to unscrew the
decoring device clockwise.
TECHNICAL SPECIFICATION
HALLDE RG-250 diwash
MACHINE: Motor: 0.55 kW. 220-240 V, single-
IP44. Degree of protection push buttons: IP65.
10 A, or 3-phase, 16 A. Fuse in fuse box for
(EN31201): 72 dBA.
NET WEIGHTS: Machine: 22 kg. Cutting tools:
About 0.5 kg on average.