Robam ZQB400-S112, Руководство пользователя, Страница: 9 / 16

Using Methods
2. Time Adjustment
3. Starting up
4. Select the Cooking Mode
7
Steam Oven
1. Power on
When plug in, there will be a sound and the indicator lights up. A few seconds later, the display shows ,
“ ” button flashes, and all other indicators light out. The unit enters into the standby mode (as shown in the
figure below).
Note: If no operation after a few minutes, it switches to the off state. time display will be light out in 10 minutes
approximately. All other indicators light out (except the “
、
” buttons, press any other button, “ ” button
flashes).
In standby mode, press and hold the button , and the hour indicator flashes. Press the or button
to set the hour, and then press “ ” button and the minute indicator flashes. Press the “ ” or “ ” button to
set the minute. It automatically enters in a few seconds. Or press “ ” button to enter the setting.
“ ” “ ” “ ”
Note: The default time is 12. If the power is disconnected for a few seconds, the time will return back
automatically to the default time “ ” again. Time needs to be reset after the appliance is plugged in.
Press and hold the “ ” button to power on the unit and enter to the default cooking mode of “ tendon”. The icon
“ ” flashes for indicating adjustable state, while the “ ” button flashes.
Press the “ ”or “ ” button to select the cooking mode as needed. The selected mode icon flashes (e.g.
selected the “fish”). The default temperature and time is shown on the display (see below figure).
1
Set the cooking temperature. Press the “ ” button to switch to the temperature display section and the indicator
flashes. Then press the “ ” or “ ” button to set the temperature needed (see below figure).
2
3