Robam WQP15-W651 B, Руководство пользователя

Страница: 21 / 25

9. TROUBLESHOOTING
FAULT POSSIBLE CAUSE TROUBLESHOOTING
Your Dishwasher is not plugged in. Plug your Dishwasher in.
Your Dishwasher is not switched on.
Switch your Dishwasher on by pressing the
On/Off buttan.
Fuse blown. Check your indoor fuses.
The programme does
not start.
Water inlet tap is closed. Turn on the water inlet tap.
Your Dishwasher door is open. Glase the Dishwasher door.
Water inlet hose and machine filters Check the water inlet hose and machine
are clogged. filters and make sure they are not clogged.
Water drain hose is clogged or
Check the drain hose, then either clean or
twisted. untwist it.
Water remains inside
the machine. The filters are clogged. Clean the filters.
The programme is not finished yet. Wait until the programme is finished.
Power failure. Check mains power.
Machine stops during
washing.
Water inlet failure. Check water tap.
Shaking and hitting
The spray arm is hitting the dishes in Move or remove items blocking the spray
noises are heard during
the lower basket. arm.
a wash operation.
Dishes placed incorrectly, sprayed
Do not overload baskets.
water not reaching affected dishes.
Dishes leaning each another.
Place dishes as instructed in the section on
loading your dishwasher.
Not enough detergent used.
Use the correct amount of detergent, as
instructed in the programme table.
Partial food wastes
remain on the dishes.
Use the information in the programme table
Wrong wash programme selected.
to select the most appropriate programme.
Spray arms clogged with food waste.
Clean the holes in the spray arms with thin
objects.
Filters or water drain pump clogged Check the drain hose and filters are
or filter misplaced. correctıy fitted.
EN -1 8