1. Maintain gas hob surface: Please clean the surface with wet and neutral detergent
cloth, and then clean with dry cloth, Don’t use steel brush or other rigidity objects.
2. Check if the copper cover, copper core and ornamental ring are shift or biasing,
and correct them at the right position in time.
3. Please deal with used battery properly avoiding pollution.
4. This product use environmental and recyclable package, please deal with those
packages properly in order to protect environment and reduce waste.
5. If maintenance confirms this product can’t be used again, please deal with
recyclable materials properly.
6. In order to keep ordinary usage and good combustion regime, operator must clean
and dredge the fire hole with brush and steel needle regularly to prevent fire from
turning back and damage gas hob. Don’t bath this product.
Flame port on internal cap
Inner-ring flame port of external cap
Flame port
on
external cap
Clean
and
Maintenance
Gas Hob
Gas Hob
11
12
Normal
(Full Combustion)
Yellow
Flame
(Air
deficiency)
Floating Flame
(Air superabundant)
Combustion well: the flame takes on cyanine, no yellow flame or red fire, the
interior and exterior flame is clear.
Air deficiency: the flame is stretched and takes on yellow or red, the interior and
exterior flame is faintly.
Air superabundance: the flame is unstable, about to leave the fire cover or flame
becomes short obviously (sometimes will occur backfire when using manufactured
gas), and color of flame appear cyan.
REMARKS: The first ignition or that of the first reuse of the gas stove may not work
immediately, because there is air in the tube, it needs to be operated repeatedly.
3. SWITCH-OFF: Turn the switch to the position clockwise (Pic1) and the fire will be
switched off.
4. FIREPOWER CONTROL: Operate according to the instruction mark.
swtich
off
position
strongest
flame
position
weakest flame
position
Pic1
Pic2
Pic3
5. Airflow control: Please adjust the inlet airflow, to make the gas fully fired.
Adjust the inlet spot nail or plate (at the bottom of hobs), by clockwise or anti
clockwise, till the flame become stable and blued colored (as following picture). Here
is the way to differ the combustion states:
(The figure is provided for reference
only and subject to the actual product.)