1.Please
make
sure
the
source
of
gas
is in line with that noted on label before your
installation of the product, otherwise it is strictly prohibited to use.
2.To connect gas source must use special gas tube, and it must be replaced at least once
per year. The length of rubber tube should be 1-1.5 meter as preferred. It is highly required
that the tube should be avoided from pressing, heavy bending or aging. The joint point
should be carefully checked to avoid any possibility of leaking and any potential damage
from the leakage, for example, poisoning or fire.
WARNING: THE GAS HOB SHOULD BE ONLY CONNECTED BY THE QUALIFIED
SPECIAL TUBE(e.g, the tube made of UV-PSA, Buna-N rubber). IT IS HIGHLY
PROHIBITED FROM USING NORMAL RUBBER TUBE. FOR THE POSSIBLE
CHEMICAL REACTION MAY HAPPEN WHEN THE NORMAL RUBBER TUBE MEET
OZONE/LIQUID OIL, WHICH WILL POSSIBLE CAUSE THE DAMAGE OF THE TUBE
AND THE RELATED POTENTIAL ACCIDENTS.
3.Don’t revolve joint of inlet tube arbitrarily. The leaking test must be done after any
abnormal change of the valve. (Put the low-concentrated cleaning solution to the joint
point and then turn on the valve to check whether any air bubble appears. If there were any
air bubble, the valve should be turned off immediately and fix the problem. It can’t be used
until the problem is completely solved).
4.The fixing metal joint should be installed strictly according to the operation manual,
which lays in the “package of the fixing metal joint”
or
installed
by
the
professional staff, if
the tube is connected by the fixing metal joint. The test of leaking should be done before
use. (The way of leaking test above is for your
reference
. )
5.
The gas hob should be installed on the place of well-ventilated, but should be avoided
from the strong wind.
6.
Do
not
try
to
cover
the
flame
on
the
gas
hob,
or
put
anything
tinder
around.
Besides
the
gas
hob
can’t
be
used
to
for
drying
towel
or
clothes,
etc.
7. Do not have the immediate touch on the flame-around area, such as work stand, burner
or cooktop after the use of the gas hob.
8. Do not try to beat the cooktop, and the special attention should be paid to keeping the
gas hob in good condition during the transport and installation.
Notice
Items
9. Once any leaking tested, the valve should be turned off immediately and the window
should be open to keep ventilated.
The
electric
fan
or
range
hood
or
any
other
electric
appliances
are
prohibited
to
use,
and
keep
the
fire
away.
Meanwhile,
please
contact
professional staff
.
10.If there were any abnormal sound such as whir heard, or the color of flame turned from
dark to light or turned muddy, the backfire from the burner might be happened. Please turn
off the switch, and check whether the burner and copper core are well-positioned. Turn on
the switch in half a minute after the check.
11. Each
time
of
turn-on
the
switch
should
be
no
more
than 20 seconds
to
avoid
from
deflagrating.
If
the
switch
cannot
be
turned
on
within
five
times,
please
contact
the
service
immediately.
12.The children are prohibited to use the gas hob in the case of safety
concern.
13.The installation and any maintenance
should
be
taken
only
by
the
professionals.
14. Be sure to keep your head away from the burner while the operation of turn-on gas hob.
Please turn off the valve of gas and switch of gas hob after the use to avoid from any
possible accident.
15. Be sure to keep any heat conductor such as metal knife, fork or cover away from the
heat.
Installation
1
.
The gas hob should be installed away from the surroundings and the distance should be
no less than 15cm,
and the height above the gas hob should be no less than 100cm.
If
range hood is needed to be installed
,
the space should be kept accordingly.
2
.
The kitchen cabinet for built-in gas hob should be specially designed for the safety
concern.
The ventilated borehole should be suitable for the safety requirement and the
size should be no less than 100
cm2.
3.When the special gas tube is used,
one side of the tube should be connected with the gas
valve while the other side connected with the inflow side of gas hob.
Please take off the
cover on the connection point and put the tube to cover the red-mark point,
and tighten it
with the anchor ear
.
Be sure that the leaking test should be taken before use.
3
4
Gas Hob
Gas Hob
