
Page: 4
use this bowl for cooking rice. Remove any foreign objects from the bowl and
heating plate.
NOTE: this step is important to the operation of the rice
cooker. Foreign objects between the bowl and heating plate can damage
the machine.
Add water to the rice. Generally, add equal portions of water to rice. However,
experience should dictate the amount of water to be added (see
Cooking
Suggestions
for more details
)
.
SW5400 and SW6000:
Clean the burn-proof pad and place it at the
bottom of the bowl. Smoothly pour the washed rice into the bowl. Do not
allow the burn-proof pad to float in the rice.
SW10000:
Clean the rice napkin and lay it into the bottom of the bowl.
Once the rice and water have been added fold the rice napkin over to
cover the raw rice.
Dry the outside of the bowl, especially the bottom and reinspect for any objects
stuck to the outside of the bowl.
Dry the inside and outside of the cooker.
Place the bowl into the cooker. Rotate the bowl to the left and right to ensure
that the bowl is properly placed above the heating plate.
Insure all liquid stays inside the rice bowl and doesn’t enter the outer pot.
Place/close the lid on the rice cooker.
Plug the Rice Cooker into the power point.
Press the Cook/Warm
switch down. The “cook” indicator light will turn on. When
the cooking time is finished the switch will automatically pop up and the “warm”
indicator light will turn on.
For best results, do
not open the cooker’s lid. Let the steam continue to cook the
rice for another 15 minutes to improve flavour. Then serve.
Open the lid (being careful to avoid the steam that will rise out of the unit)
and immediately stir the rice. Be careful when handling the rice. The product
and machine components will be hot and could cause burns.
When removing the rice from the bowl,
DO NOT BANG THE BOTTOM OF THE
BOWL
. This can easily damage the bowl which can create air gaps between the
bowl and plate. These air gaps produce localised hot spots and can potentially
damage the machine (see
Cleaning, Care and Maintenance
for more details).
If all of the rice from a batch is to be removed and used immediately,
switch off
the machine at the wall socket
and allow the unit to cool for 10-15 minutes
before filling and cooking a further batch of rice.
For the SW5400 and SW10000 models, although the Rice Cooker has a warming
cycle, the power and insulation is not sufficient to hold large quantities of rice for
any extended duration.
Содержание SW10000
Страница 13: ...Page 10 CIRCUIT DIAGRAM ...