Rob Papen RP-EQ, Руководство пользователя

Страница: 7 / 11

7
Saturation
Before or after the EQ, the sound goes through a saturation effect.
Clicking on the Saturation button will turn On / Off the Saturation effect.
Important note: the saturation effect is a very minimal detailed change to the sound. It can
be compared to tape saturation. The sound will get a bit creamier (thicker) in the low end
and because of this it adds a kind of warmth to the sound.
It requires studio speakers to hear the difference. Although very minimal in change it is still
a useful function for mastering or when used on individual audio tracks.
Pre
When this is set to On the signal goes through the saturation effect before going into the
EQ. If it is set to Off, the signal will travel through the EQ first, and then through the
saturation effect.
Amount
This dial controls the Saturation amount applied in percent.