4
RF SIGNAL RECEIVING
RCC SIGNAL RECEIVING
BAROMETER CALIBRATION
1.
After power on, the pressure reading will be flashing for 10 seconds.
If there is no need for calibration, touch
【
SNOOZE/ LIGHT
】
button to
exit setting. If calibration is required, you can press
【
+
】
or
【
-
】
button
to adjust data; press and hold
【
+
】
or
【
-
】
button will quickly change
the value by 8 steps.
2.
If no operation within 10 seconds, it will automatically save and exit
setting.
3. Barometer range: 23.62-32.75inHg (600-832mmHg,850-1050hPa/mb ).
After barometer setting, It will start receiving 3 outdoor sensors’ signal for
3 minutes. If all 3 channels signal received within 3 minutes or receiving
window ends, it will enter into RCC signal receiving window.
1. After RF signal receiving, it will start searching radio signal for 7
minutes with the antenna symbol displaying on screen
.
2. Once signal received, the main unit will display the received time/
month/date/weekday.
3. Daily RCC signal receiving: there are regular radio signal receiving at
UTC 7:00, 8:00, 9:00, 10:00, 11:00 each day. It starts receiving signal at
7:00 everyday. For each day, once signal received at any one receiving
time, it will stop receiving signal that day.