HOWTO: Waste Water Dumping
110
© 2016 by Erwin Hymer Group North America, Inc.
Rubber doughnut installed on nozzle
Rock used as weight to hold the hose
•
• Push the jogger handle in and turn it to loosen any materials in the macerator. Pull the jogger handle out.
•
• Open the black water tank gate valve by pulling the black handle out. It will come out approximately three inches (8 cm)
and stop.
•
• Press and hold the waste water pump button until the tank is empty.
•
• Close the black water tank valve by pushing in on the handle.
•
• Open the grey water tank gate valve by pulling the grey handle out. It will come out approximately 1 1/2 inches (4 cm) and
stop.
•
• Press and hold the waste water pump red button until the grey waste tank is empty.
•
• Close the gray tank valve by pushing it back in to the original position.
