Roadtrek CHASE 2021, Руководство пользователя

Страница: 65 / 82

8
Note the GUI and Logic Controller versions at the bottom of the screen. Please have these numbers
available before calling technical support.
Tap to navigate to the Network Diagnostics page.
Tap to disable the touchscreen for 15 seconds for the purpose of cleaning.
Wireless Switch status display (Mid Switch)
Green – Over 100 (Strong) Yellow – 85-100 (Medium) Red – Less than 85 (Weak)
Red Wireless Graphic with a Zero reading – The switch is currently disconnected from the screen. It is likely that
the battery inside your switch panel needs replaced. The wireless switch panel in your coach will illuminate a
green LED whenever a button is pressed. If the LED on your switch panel does not illuminate when you press a
button on your switch, you will need to replace the 2032 coin cell battery. If the LED is illuminating but the
switch still won’t function, the switch will need to be paired (see page 15).
Tap to select between Fahrenheit and Celsius.
Tap to navigate to the Vegatouch Mira connection screen.
Settings
1
2
3
4
1
2
4
5
6
7
6
When Auto Dimming is enabled, the screen will enter sleep mode after 60 seconds of inactivity. Tap
anywhere on the screen to wake it up. Please note that even if Auto Dimming has been disabled, the
screen will still enter sleep mode after 4 hours of inactivity during daytime hours (5am
– 10:59pm) and
after 15 minutes of inactivity during night time hours (11pm-4:59am) as the result of a built in screen
saver that cannot be disabled.
7
3
Tap to Enable/Disable the Low Voltage Buzzer (see page 17). The buzzer will always enable after a power cycle.
5