Roadstar PCD-9700, Инструкция по эксплуатации

Страница: 9 / 12

7. Adjust the VOLUME control to your desired listening level.
8. To stop playback temporarily, press the PLAY/PAUSE ( ) button (6) once. The
time and track number will flash on the display. Press the PLAY/PAUSE ( ) button again
to resume playback.
9. To stop playback, press the STOP (7) button once.
10. To turn the unit off, press the STOP (7) twice.
Notes:
.
When the CD door is accidentally opened during playback, OPEN will appear on the
display.
.
Wait until the disc is fully stopped before pressing the OPEN button.
.
This unit can play 3” (8cm) single CDs without an adaptor.
1. Press the BACKWARD button once to go back to the beginning of the current track.
2. Press the button repeatedly to go back to previous tracks.
3. Press the FOWARD button repeatedly to go to next tracks.
4. Press and hold either FORWARD or BACKWARD button to search backwards
or forwards, at high speed, a particular point of track.
Note: Low level audio will be heard during the search process to assist in locating the
correct point in the track.
1. Press the PLAY/PAUSE button (6) and after 3 seconds the STOP button (7).
2. To repeat the same track, press the ENTER/REPEAT button (12) once. The indicator
‘REPEAT” will flash on the display and starts single repeat playback until STOP button
(7) is pressed.
3. To repeat the entire disc, press the ENTER/REPEAT button (12) twice. The indicator
will appear on the display, and all tracks will be repeated.
To the repeat mode, simply press the STOP button (7). The indicator disappears
from the display.