Roadstar HIF-9907, Руководство по обслуживанию

Страница: 3 / 47

WARNING:
FOR CONTINUED SAFETY THE FOLLOWING PRECAUTIONS SHOULD BE FOLLOWED
DURING SERVICING.
1.MAKE SURE POWER CORD IS DISCONNECTED BEFORE REPLACING ANY PART.
2.REPLACE WITH TYPE, CRITICAL PARTS WITH! MAKE ON THIS DIAGRAM.
3.THE FOLLOWING TEST MUST BE IMPLEMENTED AFTER EACH REPAIR BEFORE
RETURNING IT TO CUSTOMER.USE AN OHM-METER TO MEASURE THE F.C.
RESISTANCE FROM BOTH A.C.CONDUCTORS TO ANY EXPOSED METALLIC PART
SUCH AS A SCREW HEAD.METAL INLAYS ETC. THE RESISTANCE MEASURED SHOULD
BE 10 MEGAOHMS MINIMUM.
TECHNICAL SPECIFICATION
Power output :2 Watts RMS per channel NOTE:
into 8 ohms In keeping with our policy of continually
Frequency response :40Hz-15KHz improving our service and the technical
Bass Boost :100Hz+10dB quality of our products we reserve the right
to change component type.manufactures
sources of supply of technical specification
are any time.
TUNER SECTION
FM Section :88MHz-108MHz
AM Section :540KHz-1600KHZ
CASSETTE SECTION
Tape :Cassette type
Tape :4.75cm per second
Tracks :2Tracks stereo
Frequency Response :125Hz-8KHz
CD PLAYER SECTION
Frequency Response :40Hz-10KHz
S/N Ratio :60dB
Channel Separation :40dB
MODEL:HIF-9907
TITLE: WARNING AND TECHNICAL
SPECIFICATION
3