Roadstar CDR-265U, Инструкция по эксплуатации

Страница: 5 / 32

English English
5 6
FOLDER FUNCTION IN MP3/WMA MODE
2. Press the PLAY/PAUSE ( >II ) button again to resume playback of that Album from
track 1.
• Discs should be returned to their cases after use. This avoids serious scratches that
could cause the Laser pickup to skip.
• Do not expose discs to direct sunlight, high humidity, or high temperatures for extended
periods. Long exposure to high temperatures can warp the disc.
• Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
compartment with the label side facing up. Locate 3” discs, on the central spindle in the
compartment.
4. Close the door by pressing on the corner of the CD door.
The total number of tracks appears on the display:Press PLAY/PAUSE Button (

II
) (17)
During playback, the actual track appears
.
5. Adjust the VOLUME control to your desired listening level.
6. To stop playback temporarily, press the PLAY/PAUSE (

II
) button (17) once. The Play
indicator will flash on the display. Press the PLAY/PAUSE (

II
) button again to resume
playback.
Notes:
• When the CD door is accidentally opened during playback, "OP" will appear on the
display.
• Wait until the disc is fully stopped before opening the CD (2) compartment.
• This unit can play 3" (8cm) single CDs without an adaptor.
tracks.
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK
1. Press the SKIP Back (

)(14) button once to go back to the beginning of the current
track.
2. Press the SKIP Back button repeatedly to go back to previous tracks.
3. Press the SKIP Forward (

)(13) button repeatedly to go to next tracks.
4. Press and hold either SKIP Forward or SKIP Back button to search backwards or
forwards, at high speed, a particular point of track.
Note:
Low level audio will be heard during the search process to assist in locating the
correct point in the track.
REPEAT PLAYBACK WITH CD/MP3
1. Press the PLAY/PAUSE button (17).
2. To repeat the same track, press the PROGRAM/ P-MODE button (11) once. The indicator
7. To stop playback, press the STOP (  ) (19) button once.
8. To switch OFF the unit
press the Stand-By button (2)
.
1.
Keep pressed
the /+10 or FOLDER -/-10 button (7/12) to select the
desired ALBUM number
, then press Skip + or - to select the folder
.
Note:
You can use the /+10 or FOLDER -/-10 Button (7/12) to jump 10 tracks up
or down.
4. To repeat the
the entere disc
, press the PROGRAM/ P-MODE button (11) 3 times.
will
l appear on the display.
Press the P-MODE button repeatedly until the indicator disappears from the
display to cancel
all
repeat.
CD/MP3/USB PLAYBACK
Loading and Unloading Compact Discs
1. Set the Function Selector (9) to the CD/MP3/USB
/AUX
Position.
2. Open the disc compartment by lifting the CD OPEN corner (6).
3. When the door has opened, remove a disc from its case and place it carefully in the
‘
compare
on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
PROGRAM/ P-MODE button (11) button 4 times more to cancel single repeat. The
indicator disappears from the display.
3. To repeat the entire
FOLDER
, press the PROGRAM/ P-MODE button (11) twice. will
appear
FOLDER
on the display
(MP3 mode only)
.
Press the PROGRAM/ P-MODE button (11) button 3 times more to cancel all disc
repeat. The indicator
FOLDER
disappears from the display.
Loading MP3 files from a USB memory Stick
1. Set the function switch to CD/MP3/USB
/AUX
.
2. Press the
PLAY/PAUSE/USB
button (1
7
)
few seconds
until ‘USB’ is shown on the display.
3. Connect the MP3 player to the USB port to switch it on.
4. Once playing, the USB MP3 track can be selected in the same way as the CD