RoadScan Canada PBC4, Руководство пользователя

Страница: 4 / 14

5/14/2019 2019 Model PBC 4 Manual - Google Docs
https://docs.google.com/document/d/1BvTOtSWYY_iHT_ptq7ZB4g5TZlTH-uJqAmD0SyiHSbc/edit 4/14
BASIC OPERATIONS DESCRIPTION
1. Power On / Record – Slide the switch on the right side of the camera (from the back) so that
the switch is covering the OFF label. The camera will power on, emit a chime, a “recording
started” voice warning and will begin recording.
2. Power off / Stop Recording – Slide the switch on the right side of the camera (from the back)
so that the switch is covering the REC label. The camera will stop recording and shut down.
3. Reset – **Please note before using the bu on that: It is recommended to ONLY USE THE RESET
BUTTON ONLY WHEN THE CAMERA IS WORKING ABNORMALLY (i.e. THE CAMERA FREEZES) and
all other op ons have been tried. A er the Reset Bu on has been pressed, turn the camera off
then back on again and the camera should work properly. Data will be saved.
Voice Alarm
The camera will emit a voice alarm when;
1. When the camera is powered on the camera will emit a voice alarm “ RECORDING STARTED…”.
2. When the camera’s ba ery is deple ng or low, the camera will emit a voice alarm “ LOW
BATTERY…” .
3. When there is only 200mb of storage remaining, the camera will emit a voice alarm “ CARD
FULL, CARD FULL…” .
4. Upon changing the se ngs on the camera and hi ng ‘apply’ these changed se ngs via a
computer connec on ( See Change Se ngs Instruc ons ) will be saved with a voice alarm sta ng
“ UPDATE SETTINGS…” , a er disconnec on of the camera from the computer.
Charging
Place the camera into the charging dock so that the Lens side of the camera is facing the LED on the
front of the dock. Plug the USB cord into the back of the dock and a ach the other side of the USB
into an outlet, computer, or plug the USB into a charging dock and a ach the dock into a power outlet.
You may also use a car charger to charge your camera.
Page 3