Roadragon MT-009 4G, Руководство пользователя

Страница: 8 / 13

MT-009
User manual
7
gnal or serious interference, the vehicle will temporarily store the data of vehicle operation in
FLASH, and when the wireless signal returns to normal After that, these data can be supple
mented, so that the data is not missing. ;

Built-in 3-axis acceleration sensor, integrated with precise acceleration algorithm, real-time a
cquisition of vehicle status and other vehicle conditions;

High-sensitivity GPS/BDS dual-satellite positioning module, anti-jamming ceramic antenna, t
o achieve more stable satellite search signal, support AGPS fast positioning tracking, synchron
ous timing;

In sleep mode, it supports low battery voltage monitoring alarm, abnormal vibration alarm
and other vehicle startup, flameout, and sleep automatic reporting messages;

Support online remote upgrade and remote configuration of product parameters.

Low-power energy-saving mode, which can accurately judge the ignition and flameout statu
s of the car, and the intelligent sleep and wake-up mechanism can reduce the average power
consumption of the entire system;
3 Getting Started
3.1 Installation
3.1.1 Installing a SIM Card
3.1.2 Device installation Precautions
a. Please pay attention to waterproof products.
b. Please keep the car battery fully charged.
c. The power supply of the device is between 9V and 36V DC. The installation should first determine
whether the user's power system is within this range. Exceeding the maximum voltage of the terminal will
damage the terminal.
d. When the ambient temperature exceeds the normal operating temperature range of the terminal, it is
Recommended to power off.
e. When the vehicle is in an underground parking lot, tunnel or garage, it will affect the positioning signal.
And the communication network signal blind zone may cause the device to be unable to monitor; when the
vehicle drives out of the above area, the device will automatically resume normal operation.
f. In case of abnormal situation, please do not repair it yourself. The manufacturer is not liable for damage
caused by connecting non-original accessories or unplugging the connections between the various
components.
3.1.3 Attention to Equipment Wiring
Power supply, ACC
、
power supply line (4 Pin)
1. If the standard power supply of this equipment is 12 V-100VDC, please choose the power line provided
by the original factory, the red line is the positive pole of the power supply, and the black one is the