Page 1 of 6
IMPORTANT
: LEAVE ALL HARDWARE LOOSE UNLESS
STATED OTHERWISE IN THESE INSTRUCTIONS!
1. SIDE CHANNEL ASSEMBLY -
Slide rear side channels fully into front side channels.
2. ASSEMBLE #4 REAR BAR -
Slide the #4 rear bar onto the side channels and secure
with two clevis pins
(Y)
& two lynch pins
(S)
(See Hardware List On Page 5)
3. LEG INSTALLATION –
(All 4 legs are identical)
Insert the legs into the rack assembly
with the tie-down hooks facing outward. Bolt the rear legs and rear bar together using two
bolts
(N)
each bolt receives
two flat washers
(G)
(one on each side of the leg.) A 10mm
high nut
(B)
and a black plastic knob
(W)
Do
NOT
put bolts in the front legs yet.
4. CLAMP PLATE INSTALLATION
- Attach the clamp plates to the side channel
assemblies. Clamp plate with slotted bracket faces the inside. (This is where you will
mount the #3 crossbar.) Secure each bracket with four carriage bolts
(M)
each bolt
receives one flat washer
(U)
one lock washer
(P)
and one nut
(Z)
on the inside of the
bracket.
Stainless Steel Truck Rack
