Roadpro RPPI-2500W, Руководство пользователя

Страница: 8 / 20

8
CONNECTING ALL FOUR DC POWER CABLES: RED = +, Black = ––
1. Turn the On/Off Switch to the OFF position.
2. Connect both red cables to the red input terminals on the right side of the
inverter. Insert the bare end of the cables into the terminal and tighten the
screw to safely clamp cables.
Note: Both red cables must be connected for the RPPI-2500W to function properly.
3. Connect both black cables to the black input terminals on the left side of the
inverter. Insert the bare end of the cables into the terminal and tighten the
screw to safely clamp cables.
Note: Both black cables must be connected for the RPPI-2500W to function properly.
4. Attach both the BLACK cables to the battery’s negative (-) terminal then attach
both the RED cables to the battery’s positive (+) terminal. Use grommets to
protect cables from bare metal edges.
CAUTION
Reversing the polarity of these cables (positive to negative) will result in
damage to the RPPI-2500W and will void the warranty.
Use only the cables supplied with this unit. Using longer cables will require a thicker cable
to reduce or minimize voltage drop to inverter.
5. For safety disconnect the RPPI-2500W from the battery when not in use.
Installation -
Please Note You Must Connect All Four Cables for Proper Installation