2. If the display panel is damaged and the liquid crystal substance leaks
out, be sure not to get any in your mouth. If the substance contacts your
skin or clothes, wash it off using soap and water.
3.Do not apply excessive force to the display surface or the adjoining
areas since this may cause the color tone to vary.
4. The polarizer covering the display surface of the LCD module is soft
and easily scratched. Handle this polarizer carefully.
5. If the display surface becomes contaminated,breathe on the surface and
gently wipe it with a soft dry cloth.
6. Extra care to minimize corrosion of the electrode. Water droplets,
moisture condensation or a current flow in a high-humidity environment
accelerates corrosion of the electrode.
7. Install the LCD Module by using the mounting holes. When mounting the
LCD Module, make sure it is free of twisting, warping and distortion. In
particular, do not forcibly pull or bend the I/O cable or the backlight
cable.Do not attempt to disassemble or process the LCD Module.
8. NC terminal should be open. Do not connect anything.If the logic circuit
power is off, do not apply the input signals.
9. To prevent destruction of the elements by static electricity, be
careful to maintain an optimum work environment.
Warnings:
1 .Be sure to ground the body when handling he LCD Module.
2. Tools required for assembling, such as soldering irons, must be
properly grounded.
3. To reduce the amount of static electricity generated, do not conduct
assembling and other work under dry conditions.
4. The LCD Module is coated with a film to protect the display surface.
Exercise care when peeling off this protective film since static
electricity may be generated.
5. When storing The LCD Module, avoid exposure to direct sunlight of
