Other Functions
In any running state, the video signal can switch
to reverse video state when reversing the car,
and the system shall return to its initial running
state after reversing the car.
Rearview function
Backup rearview
Analog on-site backup
Warn:
Do not rely on CCD system completely, please make sure your car is safe by your eyes
during driving. Back rearview system only assists in driving. As the distance range of
rearview system is limited, completely relying on the rearview system during driving may
cause accidents.
14
13
Access setup interface
Click [Settings] icon on main interface to access setup interface.
Slide
up and
down
SWC Setup
You can also perform control to the unit by the steering wheel of the car.
Connect the positive and negative terminal of the car SWC cable with the positive and
negative terminal of the SWC cable of the unit respectively.
Click buttons on the steering wheel one by one and keep a record of relevant sequences.
Click appropriate function setup to save the settings.
Touch Screen Calibration
If errors occur in touch position, you can calibrate touch coordinates.
Enter touch calibration interface, Use a touch pen to click the central area of symbol “+”,
calibrate the screen in the moving sequence of the central area of “+”. After calibration is
completed, system will automatically save data and exit the screen.
更换图片
The front camera
Connect the video signal input cable of front camera to the front video input port on the
machine; tap the icon
【 】
o enter front camera video interface.
Click the icon FC/RC on the interface to switch front camera and rear camera (Note: Both
the front camera and the rear camera are required to be powered to achieve this function.)
You can set the existing functionality of the universal set.
Содержание U-2224
Страница 10: ...01 01...
